GulfServiceProsGulfServicePros
Get listed
Skip to results

Wiring & Rewiring in Terrytown, Louisiana

Found 22 local pros· Pricing updated Jul 2026

Compare wiring & rewiring contractors serving Terrytown and Jefferson Parish. Read ratings, confirm Louisiana licenses, and contact pros directly — free for homeowners.

Show closest pros first

Enter your ZIP to sort by distance.

Sorted by distance from Terrytown. Enter your ZIP above to sort by your exact location.

22 pros

Explore more

All home services in Terrytown · Wiring & Rewiring across Louisiana

Before hiring a wiring & rewiring contractor in Terrytown

  • Verify the contractor's license with our free license lookup tool (checks the state board's records).
  • Confirm insurance is current. Ask for a Certificate of Insurance (COI).
  • Regional utilities include Electric: Entergy Louisiana, DEMCO, Cleco; Gas: CenterPoint Energy, Atmos Energy.
  • Get the full scope in writing before work begins (what's included vs. add-ons).
  • Ask about response time and workload during subtropical humid seasons.
  • Compare at least 2 quotes for larger jobs.
  • Not sure what license or insurance a wiring & rewiring pro actually needs in Louisiana? Read our Electrician licensing & insurance guide.

About wiring & rewiring in Terrytown

If your Terrytown house went up between the mid-1960s and mid-1970s — as most of the subdivisions off Terry Parkway did — there's a real chance it has aluminum branch wiring, and nearly every home of that era has undersized circuits, two-prong outlets, or cloth-insulated runs somewhere. Rewiring is disruptive, but it's the fix insurers and inspectors increasingly demand. Listings below are established local companies with ratings shown; contractors completing our verification process carry a Verified badge.

What wiring & rewiring costs in Terrytown

Job Typical cost Time
Aluminum wiring remediation (AlumiConn/COPALUM, whole house) $1,500–$4,000 1–2 days
Partial rewire (kitchen or single area) $1,500–$4,500 2–3 days
Whole-house rewire (1,200–1,800 sq ft slab ranch) $8,000–$16,000 4–8 days
Grounding upgrade (two-prong to grounded outlets) $1,500–$4,000 1–2 days
Panel replacement with rewire $2,500–$5,000 1–2 days

Slab construction limits access, so pricing here skews above pier-and-beam markets. Insist on itemized written quotes.

Aluminum wiring, honestly

  • It's a connection problem, not a "rip it all out" problem. Aluminum wire itself carries current fine; failures happen where it terminates at devices. Approved connector remediation ($1,500–$4,000) is a legitimate alternative to a full rewire — a contractor who only quotes the $15,000 option isn't giving you the whole picture.
  • Insurance is often the forcing function. Louisiana carriers commonly require remediation documentation or a four-point inspection on 60s–70s homes before writing or renewing a policy.
  • Slab homes rewire through the attic. With no crawlspace, new runs drop down walls from above — expect some drywall patching in the quote, and be wary of bids that don't mention it.
  • What a quality rewire includes: Jefferson Parish permit and inspection, copper homeruns, AFCI protection on bedroom circuits, GFCI in wet areas, proper grounding to code, and a panel labeled circuit by circuit.

Common questions about wiring & rewiring in Terrytown

How much does it cost to rewire a house in Terrytown, LA?
A whole-house rewire on a typical 1,200–1,800 sq ft Terrytown slab ranch runs $8,000–$16,000, including permit, drywall patching allowance, and a labeled panel. Aluminum wiring remediation with approved connectors is far cheaper at $1,500–$4,000 if the wire itself is sound. Partial rewires of a kitchen or addition run $1,500–$4,500.
How do I know if my house has aluminum wiring?
Homes built roughly 1965–1975 are the risk window, which covers much of Terrytown. An electrician can confirm by pulling an outlet or checking cable jackets in the attic for 'AL' or 'ALUMINUM' markings. Don't pull devices yourself if you're not comfortable — loose aluminum terminations are exactly where the hazard lives.
Does aluminum wiring have to be completely replaced?
No. The recognized fixes are COPALUM crimps or AlumiConn connectors installed at every switch, outlet, and junction, which address the loose-connection failure mode at a fraction of rewire cost. Full replacement is the gold standard but is only mandatory if the wiring is damaged or you're renovating anyway. Get quotes for both approaches.
Will insurance cover a home with old wiring in Louisiana?
Increasingly, only with conditions. Louisiana insurers commonly require a four-point inspection on older homes and may decline or surcharge policies with untreated aluminum branch wiring, fuse boxes, or certain recalled panel brands. Documented remediation by a licensed electrician usually satisfies carriers — keep the permit and invoice.
How disruptive is rewiring a slab home?
More than pier-and-beam, since everything routes through the attic and down the walls. Expect 4–8 working days for a whole house, cuts in drywall at outlet drops, and power off to sections of the home during the day. Good contractors sequence the work so you keep the AC and refrigerator running overnight.
Do I need a permit to rewire in Terrytown?
Yes — Terrytown is unincorporated Jefferson Parish, and rewiring requires an electrical permit with parish inspections at rough-in and final. The electrician pulls it. The inspection record is also your proof for insurers and future buyers that the work was done right.
Are two-prong outlets illegal or unsafe?
They're legal to leave in place but signal an ungrounded circuit, which modern electronics and surge protectors need. Options range from GFCI replacements (code-compliant, no new wire) to running new grounded circuits at $1,500–$4,000 for a typical house. If you're already opening walls or remodeling, grounding upgrades cost far less done at the same time.

Nearby service areas

About Terrytown

Terrytown is an unincorporated Jefferson Parish community on the West Bank of the Mississippi, immediately south of Gretna and adjacent to the Belle Chasse Highway corridor. The area developed primarily as residential subdivisions in the 1960s-80s, with brick ranch and split-level homes on slab foundations dominating the housing stock. Terrytown's low elevation and dependence on Jefferson Parish drainage infrastructure produce regular demand for plumbing work, sump pump installation, and elevated electrical service. The community's mature housing stock commonly faces 50-year maintenance cycles: cast-iron drain replacement, original galvanized water line repipes, and electrical panel upgrades from 100-amp to 200-amp service. Lake-influenced humidity and a long cooling season drive steady HVAC service demand, particularly for system replacement and air duct cleaning in homes with original 1970s-era ductwork in unconditioned attics. Jefferson Parish permitting applies to all major work. GulfServicePros lists established Terrytown companies with ratings shown, so you can compare pros who understand the local building stock and parish requirements. Contractors that complete our verification process carry a Verified badge.